Draw wire encoder installation notes are as follows:
Use the mounting bracket or the bottom four fixing screw holes, according to the needs of the installation site and machine space facilities, choose the correct orientation to install directly.
Note that when installed at both ends of sufficient buffer stroke (see product selection notes), and pay attention to the settings. Installation, pay attention to the traction rope outlet angle, that is, try to make the traction rope from the outlet to the mobile part of the body, the work of a straight line sliding, try to keep the minimum angular deviation (tolerance ¡À 3 ¡ã, deviation of 1000mm transverse deviation does not exceed 35mm) , To ensure measurement accuracy and the life of the traction rope. Long stroke vertical installation, it is recommended to pull rope body installed in the lower part of the traction rope traction. The tow rope is a wire rope of Japan KK, and should not be cut, burned, bumped or otherwise impacted by external forces. Excessive dust, debris, acid-base environment enough to undermine the internal measurement components, resulting in not running smoothly, reducing measurement accuracy and even premature damage. Not installed in the workbench or holder before, do not pull the traction rope with your hand or other objects and let it instantly rebound. This may lead to broken traction rope, hurt the body structure or personal safety.
Previous£º rotary pulse generator
