Absolute encoders conventional shape: 38MM, 58MM, 66MM, 80MM.100MM.
2. Absolute encoder is divided into: single lap, multi-turn.
three. The bus encoders are divided into: absolute value encoders, light absolute encoders
Four Bus encoder outlet mode is divided into: side outlet, after the outlet
Fives. Bus encoder axis is divided into: 6MM, 8MM, 10MM, 12MM, 14MM, 25MM.
Six Bus encoders are divided into: shaft, blind hole, through hole.
Seven. Bus encoder protection is divided into: IP54-68.
Eight. Bus encoder installation is divided into: clamping flange, synchronous flange, clamping band synchronous flange, blind hole (spring, hold tight), through
Hole (spring piece, key pin)
Nine BEN absolute encoder accuracy is divided into: single-turn accuracy and multi-turn absolute encoder accuracy, add up to the total accuracy, which is usually the number of bits (conventional 24
For 25, 30, 32. The The The ).
Ten Absolute encoder communication protocol Baud rate: 4800 ~ 115200 bit / s, wood that 9600 bit / s. Refresh cycle of about 1.5ms
11. Encoder output optional: SSI, 4-20MA, profibus-dp, DEVicenet, parallel, two pounds of code, BiSS, ISI,
Previous： What is the advantage of through hollow shaft incremental encoder
